Thermal imaging is commonly used for electrical, mechanical and building inspections. As electrical connections become loose, the resistance to current at the untied joins can lead to increase in temperature beyond the design tolerances causing equipment to fail. This often results in plant outages, personnel injuries, electrical fires, massive insurance claims and capital losses. In addition, the efficiency of electrical system is significantly diminished due to parasitic heat generation leading to increase in overall power demand per unit of product and leading to significant revenue losses.
Contact to arrange Switchboard Inspections Switchboard thermographic inspection makes it possible to reveal the problem areas within the switchboards and helps to make quick assessments with recommendations on correction actions. It identifies energy losses, reveals electrical faults before it is too late. Inspections by help to avert significant damages to equipment personnel and the budgets.
Contact to arrange inspection of Fuse Links. Fuse links are designed to protect downstream and upstream cabling as well as the equipment at both sites. However, in this case the problem of overheating is obvious. This could be related to a weak connection, which will rapidly deteriorate the fuse holder, or an unbalanced 3-phase load. In both cases the energy losses would be significant before a definite damage to the supply system is done.
Contact to arrange thermographic inspection of High Voltage Equipment. If you could only see when the components are about to fail, you could accurately decide the best time to take the corrective actions. Unfortunately, the worst problems remain hidden for a naked eye until it is too late, but on a thermal image the problems seem to jump right out at you. Periodic IR inspections are one of the best-known diagnostic methods for condition monitoring of high voltage equipment thanks to its non-contact and a highly revealing nature.
Contact to arrange thermographic inspection of Mechanical In many industries, mechanical systems serve as key elements of production lines. Periodic thermographic inspections can reveal the areas of overheating and prevent the expensive mechanical parts from slipping unnoticed by the plant maintenance personnel.